How to install high ribbed formwork

Scenayuan Hardware Metal Mesh Co.,Ltd.,will provice detail install information for hy rib mesh.
Fast-EZ High-Ribbed Formwork can be used combined with traditional frame.
It is equivalent to 20mm plywood. 
It can be installed with the ribs placed horizontally or vertically, but support members should always be at right angles to the ribs.
Ribs should be always face the side towards which concrete is poured in.
Mesh is suitable to be cut with heavy scissor or grinder on the site.
Adjacent sheets should jointed by overlapping the ribs by 150mm.
End sheets are overlapped by 150mm over the supports. 
Fast-EZ High-Ribbed Formwork can be used with all conventional support systems. To eliminate stripping of support, suitably formed rebar can be sued instead of conventional timber studs. Fastening to supports can be by nailing to timber or by wire tying to steel and rebar.